ZyXEL p-334 Manual Do Utilizador

Prestige 334 User’s Guide

Chapter 15 VPN Screens

164

Click Edit on the Summary screen or click the Rule Setup tab to edit VPN rules. 

Figure 64   VPN: Rule Setup (Basic)

The following table describes the labels in this screen.

Table 51   VPN: Rule Setup (Basic)

Active

Select this check box to activate this VPN tunnel. This option determines whether 

a VPN rule is applied before a packet leaves the firewall.

Keep Alive

Select this check box to have the Prestige automatically re-initiate the SA after 

the SA lifetime times out, even if there is no traffic. The remote IPSec router must 

also have keep alive enabled in order for this feature to work. 

NAT Traversal

Select this check box to enable NAT traversal. NAT traversal allows you to set up 

a VPN connection when there are NAT routers between the two IPSec routers.
The remote IPSec router must also have NAT traversal enabled. 
You can use NAT traversal with ESP protocol using Transport or Tunnel mode, 

but not with AH protocol nor with manual key management. In order for an IPSec 

router behind a NAT router to receive an initiating IPSec packet, set the NAT 

router to forward UDP port 500 to the IPSec router behind the NAT router.