ZyXEL p-334 Manual Do Utilizador

Prestige 334 User’s Guide

Chapter 22 Internet Access

222

Figure 101   Internet Access Setup (PPPoE)

The following table contains instructions about the new fields when you choose PPPoE in the 
Encapsulation field in menu 4.

If you need a PPPoE service name to identify and reach the PPPoE server, please go to menu 
11 and enter the PPPoE service name provided to you in the Service Name field.

Well done! You have successfully connected, installed and set up your Prestige to operate on 
your network as well as access the Internet. 

You may deactivate the firewall in menu 21.2 or via the Prestige embedded web configurator. 
You may also define additional firewall rules or modify existing ones but please exercise 
extreme caution in doing so. See the chapters on firewall for more information on the firewall.

                     Menu 4 - Internet Access Setup

            ISP's Name= MyISP
            Encapsulation= PPPoE
              Service Type= N/A
              My Login=
              My Password= ********
              Retype to Confirm= ********
              Idle Timeout= 100
            IP Address Assignment= Dynamic
              IP Address= N/A
              IP Subnet Mask= N/A
              Gateway IP Address= N/A
            Network Address Translation= SUA Only

         Press ENTER to Confirm or ESC to Cancel:

Table 73   New Fields in Menu 4 (PPPoE) screen

Encapsulation

Press [SPACE BAR] and then press [ENTER] to choose PPPoE. The 

encapsulation method influences your choices in the IP Address field.

Idle Timeout

This value specifies the time in seconds that elapses before the Prestige 

automatically disconnects from the PPPoE server.

Note: When the firewall is activated, the default policy allows all 
communications to the Internet that originate from the LAN, and 
blocks all traffic to the LAN that originates from the Internet.