ZyXEL p-334 Manual Do Utilizador

Prestige 334 User’s Guide

Chapter 23 Remote Node Configuration

226

The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). You can only use 
PPPoE encapsulation when you’re using the Prestige with a DSL modem as the WAN device. 
If you change the Encapsulation to PPPoE, then you will see the next screen. Please see the 
appendix for more information on PPPoE.

Figure 103   Menu 11.1 Remote Node Profile for PPPoE Encapsulation

Generally speaking, you should employ the strongest authentication protocol possible, for 
obvious reasons. However, some vendor’s implementation includes a specific authentication 
protocol in the user profile. It will disconnect if the negotiated protocol is different from that in 
the user profile, even when the negotiated protocol is stronger than specified. If you encounter 
a case where the peer disconnects right after a successful authentication, please make sure that 
you specify the correct authentication protocol when connecting to such an implementation.

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press 

[ENTER] to go to Menu 11.3 - Remote Node Network Layer Options.

Session Options

 Edit Filter Sets

This field leads to another “hidden” menu. Use  [SPACE BAR] to select Yes and 

press [ENTER] to open menu 11.5 to edit the filter sets. See the Remote Node 

Filter section for more details.

Edit Traffic 

Redirect

Press [SPACE BAR] to select Yes or No. 
Select Yes and press [ENTER] to configure Menu 11.6 Traffic Redirect Setup. 

Select No (default) if you do not want to configure this feature.

Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to 

save your configuration, or press [ESC] at any time to cancel.

Table 74   Menu 11.1 Remote Node Profile for Ethernet Encapsulation

                       Menu 11.1 - Remote Node Profile

   Rem Node Name= MyISP                 Route= IP
   Active= Yes
   Encapsulation= PPPoE                 Edit IP= No
   Service Type= Standard               Telco Option:
   Service Name=                          Allocated Budget(min)= 0
   Outgoing:                              Period(hr)= 0
     My Login=                            Schedules=
     My Password= ********                Nailed-Up Connection= No
     Retype to Confirm= ********
     Authen= CHAP/PAP
                                        Session Options:
                                          Edit Filter Sets= No
                                          Idle Timeout(sec)= 100
                                        Edit Traffic Redirect= No

                  Press ENTER to Confirm or ESC to Cancel: