ZyXEL p-334 Manual Do Utilizador

Prestige 334 User’s Guide

291

Chapter 30 Firmware and Configuration File Maintenance

The following table describes some of the fields that you may see in GUI-based TFTP clients.

This section shows you how to restore a previously saved configuration. Note that this 
function erases the current configuration before restoring a previous back up configuration; 
please do not attempt to restore unless you have a backup configuration file stored on disk.  

FTP is the preferred method for restoring your current computer configuration to your Prestige 
since FTP is faster.  Please note that you must wait for the system to automatically restart after 
the file transfer is complete.

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file 
upload in this chapter

Table 98   General Commands for GUI-based TFTP Clients

Host

Enter the IP address of the Prestige. 192.168.1.1 is the Prestige’s default IP address 

when shipped.

Send/Fetch

Use “Send” to upload the file to the Prestige and “Fetch” to back up the file on your 

computer. 

Local File

Enter the path and name of the firmware file (*.bin extension) or configuration file 

(*.rom extension) on your computer.

Remote File

This is the filename on the Prestige. The filename for the firmware is “ras” and for the 

configuration file, is “rom-0”.

Binary

Transfer the file in binary mode.

Abort

Stop transfer of the file.

Note: WARNING! Do not interrupt the file transfer process as this 
may PERMANENTLY DAMAGE YOUR Prestige.