ZyXEL p-334 Manual Do Utilizador

Página de 366
Prestige 334 User’s Guide
51
Chapter 3 Wizard Setup
Where you obtain your network number depends on your particular situation. If the ISP or 
your network administrator assigns you a block of registered IP addresses, follow their 
instructions in selecting the IP addresses and the subnet mask.
If the ISP did not explicitly give you an IP network number, then most likely you have a single 
user account and the ISP will assign you a dynamic IP address when the connection is 
established. The Internet Assigned Number Authority (IANA) reserved this block of addresses 
specifically for private use; please do not use any other number unless you are told otherwise. 
Let's say you select 192.168.1.0 as the network number; which covers 254 individual 
addresses, from 192.168.1.1 to 192.168.1.254 (zero and 255 are reserved). In other words, the 
first three numbers specify the network number while the last number identifies an individual 
computer on that network.
Once you have decided on the network number, pick an IP address that is easy to remember, 
for instance, 192.168.1.1, for your Prestige, but make sure that no other device on your 
network is using that IP address.
The subnet mask specifies the network number portion of an IP address. Your Prestige will 
compute the subnet mask automatically based on the IP address that you entered. You don't 
need to change the subnet mask computed by the Prestige unless you are instructed to do 
otherwise.
3.4.3  DNS Server Address Assignment
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and 
vice versa, for instance, the IP address of www.zyxel.com is 204.217.0.2. The DNS server is 
extremely important because without it, you must know the IP address of a computer before 
you can access it. 
The Prestige can get the DNS server addresses in the following ways.
The ISP tells you the DNS server addresses, usually in the form of an information sheet, 
when you sign up. If your ISP gives you DNS server addresses, enter them in the DNS 
Server fields in DHCP Setup.
If the ISP did not give you DNS server information, leave the DNS Server fields in 
DHCP Setup set to 0.0.0.0 for the ISP to dynamically assign the DNS server IP addresses.
3.4.4  WAN MAC Address
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address 
is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02.