ZyXEL p-334 Manual Do Utilizador

Prestige 334 User’s Guide

69

Chapter 5 LAN Screens

This table allows you to assign IP addresses on the LAN to specific individual computers 
based on their MAC Addresses. 

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address 
is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02.

To change your Prestige’s Static DHCP settings, click LAN, then the Static DHCP tab. The 
screen appears as shown.

Allow between LAN 

and WAN

Select this check box to forward NetBIOS packets from the LAN to the WAN and 

from the WAN to the LAN. If your firewall is enabled with the default policy set to 

block WAN to LAN traffic, you also need to enable the default WAN to LAN 

firewall rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the 

WAN and from the WAN to the LAN.

Apply

Click Apply to save your changes back to the Prestige.

Reset

Click Reset to begin configuring this screen afresh.

Table 12   LAN IP