ZyXEL p-334 Manual Do Utilizador

Prestige 334 User’s Guide

Chapter 6 WAN Screens

74

Figure 19   Ethernet Encapsulation

The following table describes the labels in this screen.

The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft 
standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband 
modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dial-
up connection using PPPoE.

Table 16   Ethernet Encapsulation

Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular 

Ethernet.

Service Type

Choose from Standard, Telstra (RoadRunner Telstra authentication method), 

RR-Manager (Roadrunner Manager authentication method), RR-Toshiba 

(Roadrunner Toshiba authentication method) or Telia Login. 
The following fields do not appear with the Standard service type.

User Name

Type the user name given to you by your ISP.

Password

Type the password associated with the user name above.

Retype to Confirm

Type the password again to make sure that you have entered it correctly.

Login Server IP 

Address

Type the authentication server IP address here if your ISP gave you one.

Login Server 

This field only applies when you select Telia Login in the Service Type field. 

Type the domain name of the Telia login server, for example “login1.telia.com”.

Relogin Every(min) This field only applies when you select Telia Login in the Service Type field. The 

Telia server logs the Prestige out if the Prestige does not log in periodically. Type 

the number of minutes from 1 to 59 (30 default) for the Prestige to wait between 

logins.

Apply

Click Apply to save your changes back to the Prestige.

Reset

Click Reset to begin configuring this screen afresh.