ZyXEL p-2602r-d1a Manual Do Utilizador

P-2602R/RL-DxA Series User’s Guide

140

Chapter 10 Voice

After pressing the flash key, if you do not issue the sub-command before the default sub-
command timeout (2 seconds) expires or issue an invalid sub-command, the current operation 
will be aborted.

Call hold allows you to put a call (A) on hold by pressing the flash key. 

If you have another call, press the flash key  to switch back and forth between caller A and B 
by putting either one on hold.

If you hang up the phone but a caller is still on hold, there will be a remind ring.

This allows you to place a call on hold while you answer another incoming call on the same 
telephone (directory) number. 

If there is a second call to your telephone number, you will hear a call waiting tone. 

Press the flash key to put the first call on hold and answer the second call.

Do the following to transfer an incoming call (that you have answered) to another phone.

1 Press the flash key to put the caller on hold.

2 When you hear the dial tone, dial “*98#” followed by the number to which you want to 

transfer the call. to operate the Intercom.

3 After you hear the ring signal or the second party answers it, hang up the phone.

Use the following steps to make three-way conference calls.

1 When you are on the phone talking to someone (party A), press the flash key to put the 

caller on hold and get a dial tone. 

2 Dial a phone number directly to make another call (to party B).

Table 45   USA Flash Key Commands

Flash 

Put a current call on hold to place a second call. After the second 

call is successful, press the flash key again to have a three-way 

conference call.
Put a current call on hold to answer an incoming call.

Flash 

*98#

Transfer the call to another phone.