ZyXEL p-2602r-d1a Manual Do Utilizador

P-2602R/RL-DxA Series User’s Guide

244

Chapter 22 Tools

The following table describes some of the fields that you may see in GUI-based TFTP clients.

to read about configurations that disallow TFTP and FTP 

over WAN.

This section shows you how to restore a previously saved configuration. Note that this 
function erases the current configuration before restoring a previous back up configuration; 
please do not attempt to restore unless you have a backup configuration file stored on disk.  

FTP is the preferred method for restoring your current computer configuration to your device 
since FTP is faster. Please note that you must wait for the system to automatically restart after 
the file transfer is complete.

Note: WARNING!

Do not interrupt the file transfer process as this may PERMANENTLY 
DAMAGE YOUR device. When the Restore Configuration process is complete, 
the device will automatically restart.

Table 91   General Commands for GUI-based TFTP Clients

Host

Enter the IP address of the ZyXEL Device. 192.168.1.1 is the ZyXEL Device’s default IP 

address when shipped.

Send/Fetch

Use “Send” to upload the file to the ZyXEL Device and “Fetch” to back up the file on your 

computer. 

Local File

Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom 

extension) on your computer.

Remote File This is the filename on the ZyXEL Device. The filename for the firmware is “ras” and for 

the configuration file, is “rom-0”.

Binary

Transfer the file in binary mode.

Abort

Stop transfer of the file.