ZyXEL N4100 Guia Do Utilizador
Chapter 23 SNMP
N4100 User’s Guide
185
The following table describes the fields in this screen.
Table 46 ADVANCED > SNMP
LABEL
DESCRIPTION
SNMP Setup
Select Enable to allow a manager station to manage and monitor the
N4100 through the network via SNMP. Otherwise, select Disable.
N4100 through the network via SNMP. Otherwise, select Disable.
Port
SNMP Port
Enter the N4100’s port number to which the manager station sends
requests.
requests.
Trap Port
Enter the port number on which the manager station listens for SNMP
traps and information from the N4100.
traps and information from the N4100.
Configuration
No
This is the index number of the entry.
Community
Name
Enter the password for the incoming Get, GetNext or Set requests
from the management station. The default community for read-only
access is public and the default community for read-write access is
private.
from the management station. The default community for read-only
access is public and the default community for read-write access is
private.
NMS Address
Enter the IP address of the Network Management System (NMS) that
controls and monitors the managed device (N4100).
controls and monitors the managed device (N4100).
ANY means any computer that connects to the N4100 can request
SNMP information and/or receive traps from the N4100.
SNMP information and/or receive traps from the N4100.
Privileges
Select the privilege level of the password.
Read means the password is for read-only (Get or GetNext) access.
Write means the password is for read-write (Get/GetNext and Set)
access.
access.
Trap Recipient means the password is for accepting SNMP traps from
the N4100.
the N4100.
All means the password has all the above permissions.
Status
Select whether this password is valid or not.
Apply
Click this button to save your changes back to the N4100.