ZyXEL N4100 Guia Do Utilizador

 Chapter 6 Server

N4100 User’s Guide

The following table describes the labels in this screen.  

Table 9   ADVANCED > SERVER

Web Server
HTTP Port

Select this radio button if you want to access the N4100 using unsecured 
HTTP.

Specify the port number of the embedded web server on the N4100 for 
accessing the web configurator. The default port number is 80. Changing 
the port number helps protect the N4100’s web configurator from hacker 
attacks.

Enter a number between 8010 and 8060 to access the web configurator 
behind a NAT-enabled network. 

If you enter a number between 8010 and 8060, you need to append the 
port number to the WAN or LAN port IP address to access the web 
configurator. For example, if you enter “8010” as the web server port 
number, then you must enter “http://192.168.1.1:8010” where 
192.168.1.1 is the WAN or LAN port IP address.

HTTPS Port

Select this radio button if you want to access the N4100 using secure 
HTTPS.

Secure Socket Layer (SSL) security allows you to create secure 
connections between the N4100 and the management computer(s). 
Refer to 

 for more information.

Specify the port number of the embedded web server on the N4100 for 
accessing the web configurator. The default port number is 443. 
Changing the port number helps protect the N4100’s web configurator 
from hacker attacks.

Enter a number between 4430 and 4440 to access the web configurator 
behind a NAT-enabled network. 

If you enter a number between 4430 and 4440, you need to append the 
port number to the WAN or LAN port IP address to access the web 
configurator. For example, if you enter “4430” as the web server port 
number, then you must enter “https://192.168.1.1:4430” where 
192.168.1.1 is the WAN or LAN port IP address.

Administrator 
Idle-Timeout

Type how many minutes a management session can be left idle before 
the session times out. The default is 5 minutes. After it times out you 
have to log in with your password again. Very long idle timeouts may 
have security risks. A value of "0" means a management session never 
times out, no matter how long it has been left idle (not recommended).

DHCP Server

Select the DHCP mode on the LAN.

DHCP Disable

Select this option to disable DHCP server on the LAN. 

DHCP Relay

Use this if you have a DHCP server (either a computer or another router) 
and you want that DHCP server to also assign network information (IP 
address, DNS information etc.) to the devices that connect to the N4100. 
Select this option to set the N4100 to forward network configuration 
requests to a DHCP server. 

Then configure the DHCP Server IP Address field.