ZyXEL N4100 Guia Do Utilizador
Chapter 34 Troubleshooting
N4100 User’s Guide
250
One of the LEDs does not behave as expected.
1
.
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged
cables.
cables.
4
Turn the N4100 off and on.
5
If the problem continues, contact the vendor.
34.3 N4100 Access and Login
I forgot the IP address for the N4100.
1
The default IP address is 192.168.1.1.
2
If you changed the IP address and have forgotten it, you might get the IP address
of the N4100 by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the N4100 (it depends on the network), so enter this IP address in your
Internet browser.
of the N4100 by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the N4100 (it depends on the network), so enter this IP address in your
Internet browser.
3
If this does not work, you have to reset the device to its factory defaults. See
.
I cannot see or access the Login screen in the web configurator.
1
Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address, use the new IP address.