ZyXEL NBG-318S Guia Do Utilizador

 Chapter 16 Remote Management

NBG-318S User’s Guide

Figure 85   Telnet Configuration on a TCP/IP Network

To change your NBG-318S’s Telnet settings, click Management > Remote MGMT > 
Telnet. The following screen displays. 

Figure 86   Management > Remote MGMT > Telnet 

The following table describes the labels in this screen.

Table 65   Management > Remote MGMT > Telnet

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the NBG-318S using 

this service.

Secured Client 

IP Address

A secured client is a “trusted” computer that is allowed to communicate with the 

NBG-318S using this service. 
Select All to allow any computer to access the NBG-318S using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the NBG-318S using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.