ZyXEL NBG-318S Guia Do Utilizador

Appendix A Product Specifications and Wall-Mounting Instructions

NBG-318S User’s Guide

Do the following to hang your NBG-318S on a wall.

"

See the product specifications appendix for the size of screws to use and how 
far apart to place them.

1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the holes 

matches what is listed in the product specifications appendix.

1

Be careful to avoid damaging pipes or cables located inside the wall when 
drilling holes for the screws.

3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm 

between the heads of the screws and the wall. 

4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of 

the NBG-318S with the connection cables. 

5 Align the holes on the back of the NBG-318S with the screws on the wall. Hang the 

NBG-318S on the screws.

IEEE 802.11g

Uses the 2.4 gigahertz (GHz) band

IEEE 802.11d

Standard for Local and Metropolitan Area Networks: Media Access 

Control (MAC) Bridges

IEEE 802.11x

Port Based Network Access Control.

IEEE 802.11e QoS

IEEE 802.11 e Wireless LAN for Quality of Service

Microsoft PPTP

MS PPTP (Microsoft's implementation of Point to Point Tunneling 

Protocol)

Table 97   Standards Supported  (continued)