ZyXEL NBG-318S Guia Do Utilizador

Chapter 2 Introducing the Web Configurator

NBG-318S User’s Guide

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information 
here includes port status and packet specific statistics. Also provided are "system up time" and 
"poll interval(s)". The Poll Interval(s) field is configurable.

Figure 10   Summary: Packet Statistics 

The following table describes the labels in this screen.

MAC Address

This field shows the MAC address of the computer with the name in the Host Name 

field. 
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC 

address is assigned at the factory and consists of six pairs of hexadecimal 

characters, for example, 00:A0:C5:00:00:02.

Refresh

Click Refresh to renew the screen. 

Table 5   Summary: DHCP Table (continued)

Table 6   Summary: Packet Statistics

Port

This is the NBG-318S’s port type.

Status 

For the LAN ports, this displays the port speed and duplex setting or Down 

when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using 

Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) 

and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This 

field displays Down when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is 

enabled and Down when the WLAN is disabled.

TxPkts 

This is the number of transmitted packets on this port.

RxPkts 

This is the number of received packets on this port.

Collisions 

This is the number of collisions on this port.

Tx B/s 

This displays the transmission speed in bytes per second on this port.

Rx B/s

This displays the reception speed in bytes per second on this port.

Up Time 

This is the total amount of time the line has been up.

System Up Time

This is the total time the NBG-318S has been on.