ZyXEL NBG-318S Guia Do Utilizador

Chapter 6 WAN

NBG-318S User’s Guide

The following table describes the labels in this screen.

Table 33 Network > WAN > Internet Connection: Ethernet Encapsulation

LABEL

DESCRIPTION

Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular

Ethernet.

Service Type

Choose from Standard, RR-Telstra (RoadRunner Telstra authentication

method), RR-Manager (Roadrunner Manager authentication method), RR-

Toshiba (Roadrunner Toshiba authentication method) or Telia Login.
The following fields do not appear with the Standard service type.

User Name

Type the user name given to you by your ISP.

Password

Type the password associated with the user name above.

Retype to Confirm

Type your password again to make sure that you have entered is correctly.

Address

Type the authentication server IP address here if your ISP gave you one.
This field is not available for Telia Login.

(Telia Login only)

Type the domain name of the Telia login server, for example login1.telia.com.

Relogin

Every(min) (Telia

The Telia server logs the NBG-318S out if the NBG-318S does not log in

periodically. Type the number of minutes from 1 to 59 (30 default) for the NBG-

318S to wait between logins.

WAN IP Address Assignment

Get automatically

from ISP

Select this option If your ISP did not assign you a fixed IP address. This is the

default selection.

Use Fixed IP

Address

Select this option If the ISP assigned a fixed IP address.

IP Address

Enter your WAN IP address in this field if you selected Use Fixed IP Address.

IP Subnet

Mask

Enter the IP Subnet Mask in this field.

Gateway IP

Address

Enter a Gateway IP Address (if your ISP gave you one) in this field.

DNS Servers

First DNS Server
Second DNS

Server
Third DNS Server

Select From ISP if your ISP dynamically assigns DNS server information (and the

NBG-318S's WAN IP address). The field to the right displays the (read-only) DNS

server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS

server's IP address in the field to the right. If you chose User-Defined, but leave

the IP address set to 0.0.0.0, User-Defined changes to None after you click

Apply. If you set a second choice to User-Defined, and enter the same IP

address, the second User-Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure

a DNS server, you must know the IP address of a computer in order to access it.

WAN MAC

Address

The MAC address section allows users to configure the WAN port's MAC address

by either using the NBG-318S’s MAC address, copying the MAC address from a

computer on your LAN or manually entering a MAC address.

Factory default

Select Factory default to use the factory assigned default MAC Address.

Clone the

computer’s MAC

address

Select Clone the computer's MAC address - IP Address and enter the IP

address of the computer on the LAN whose MAC you are cloning. Once it is

successfully configured, the address will be copied to the rom file (ZyNOS

configuration file). It will not change unless you change the setting or upload a

different ROM file.