ZyXEL P-663H-51 Guia Do Utilizador

Chapter 11 RIP

P-663H-51 User’s Guide

The following table describes the labels in this screen.  

Table 42   Advanced Setup > Routing > RIP

Global RIP Mode

Use these fields to turn RIP on or off for the whole ZyXEL Device. When you 
disable RIP, the ZyXEL Device will not send any RIP packets and will ignore any 
RIP packets received.  

Interface

This field displays the name of the WAN connection.

VPN/VCI

The port (interface), VPI (Virtual Path Identifier) and VCI (Virtual Channel 
Identifier) identify the ATM PVC (Permanent Virtual Circuit) to which these 
settings apply. “LAN” appears for a bridged connection.

Version

This field controls the format and the broadcasting method of the RIP packets 
that the ZyXEL Device sends (it recognizes both formats when receiving). RIP-1 
is universally supported but RIP-2 carries more information. RIP-1 is probably 
adequate for most networks, unless you have an unusual network topology. 

Operation

RIP operation controls the sending and receiving of RIP packets. When set to 
Active the ZyXEL Device periodically broadcasts its routing table . When set to 
Passive, the ZyXEL Device uses the RIP information that it receives, but does 
not broadcast its routing table.

Enabled

Select or clear this field to turn RIP on or off for the interface.

Save/Apply

Click this button to save the changes and have the ZyXEL Device start using 
them.