ZyXEL P-663H-51 Guia Do Utilizador
Chapter 17 Settings
P-663H-51 User’s Guide
120
1
Do not turn off the ZyXEL Device while configuration file upload is in progress
You must then wait before logging into the ZyXEL Device again. The ZyXEL Device
automatically restarts causing a temporary network disconnect. In some operating systems,
you may see the following icon on your desktop.
automatically restarts causing a temporary network disconnect. In some operating systems,
you may see the following icon on your desktop.
Figure 67 Temporarily Disconnected
You may need to change the IP address of your computer to be in the same subnet as that of
the ZyXEL Device’s IP address (192.168.1.1). See the appendix for details on how to set up
your computer’s IP address.
the ZyXEL Device’s IP address (192.168.1.1). See the appendix for details on how to set up
your computer’s IP address.
17.3 Restoring Factory Defaults
Click Management > Settings > Restore Default to open the following screen.
Figure 68 Management > Settings > Restore Default
Click Restore Default Settings to clear all user-entered configuration information and return
the ZyXEL Device to its factory defaults.
the ZyXEL Device to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device.
ZyXEL Device.
Table 49 Management > Settings > Update
LABEL
DESCRIPTION
Settings File
Name
Name
Type in the location of the file you want to upload in this field or click Browse... to find
it.
it.
Browse...
Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
decompress compressed (.ZIP) files before you can upload them.
Update
Settings
Settings
Click this to begin the upload process.