ZyXEL P-663H-51 Guia Do Utilizador
Chapter 8 Security
P-663H-51 User’s Guide
84
Figure 43 Advanced Setup > Security > IP Filtering > Incoming > Add
The following table describes the labels in this menu.
8.5 MAC Filtering
Configure the MAC filter to block or allow access based on MAC addresses. Every Ethernet
device has a unique MAC (Media Access Control) address. The MAC address is assigned at
the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
device has a unique MAC (Media Access Control) address. The MAC address is assigned at
the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Table 28 Advanced Setup > Security > IP Filtering > Incoming > Add
LABEL
DESCRIPTION
Filter Name
Type the name configured to identify the filter entry.
Protocol
Select the type of packets to which this entry applies (TCP, UDP, or both).
Source IP
Address
Address
Type the IP address of a computer on the Internet to which this entry applies.
Source
Subnet
Mask
Subnet
Mask
Type the subnet mask of a computer on the Internet to which this entry applies.
Source Port
Type the source port for traffic (from the Internet) to which this entry applies.
Destination
IP Address
IP Address
This is the IP address and subnet mask of a LAN computer to which this entry allows
access.
access.
Destination
Subnet
Mask
Subnet
Mask
Type the subnet mask of the LAN computer to which this entry applies.
Destination
Port
Port
Type the destination port for traffic to which this entry applies.
WAN
Interfaces
Interfaces
Select the WAN interface(s) to which this rule applies.
Save/Apply
Click this button to save the changes and have the ZyXEL Device start using them.