ZyXEL P-663H-51 Guia Do Utilizador

 Chapter 10 Routing

P-663H-51 User’s Guide

The following table describes the labels in this screen. 

Click Advanced > Routing > Static Route > Add to open the following screen.  Use this 
screen to configure the required information for a static route.

Figure 56   Advanced > Routing > Static Route > Add 

The following table describes the labels in this screen. 

Table 40   Advanced > Routing > Static Route

Destination

This parameter specifies the IP network address of the final destination. Routing is 
always based on network number. 

Subnet Mask

This is the IP subnet mask.

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same 
network segment as the device's LAN or WAN port. The gateway helps forward 
packets to their destinations.

Interface

If the static route should send traffic through a specific ZyXEL Device interface, it 
displays here.

Remove

To remove an entry, select its Remove check box and click the Remove button. 

Add

Click this button to go to a screen where you can configure settings for a new static 
route.

Remove

To remove an entry select its Remove check box and click the Remove button. 

Table 41   Advanced > Routing > Static Route > Add 

Destination 
Network 
Address

This parameter specifies the IP network address of the final destination.  Routing is 
always based on network number. If you need to specify a route to a single host, 
use a subnet mask of 255.255.255.255 in the subnet mask field to force the network 
number to be identical to the host ID.

IP Subnet Mask 

Enter the IP subnet mask of the destination network here.

Use Gateway IP 
Address

If you have a specific gateway IP address to enter, select this option and enter it in 
the field provided. The gateway is a router or switch on the same network segment 
as the device's LAN or WAN port. The gateway helps forward packets to their 
destinations.