ZyXEL P-660RU-T1 Nota De Lançamento
Modification in V3.40(ST.3)b1 | 05/19/2005
1.
1.
[Bug Fix] SPRID: 050505225
Symptom: While use “Full Feature” mode in NAT in GUI, and configure rule in “Full
Feature”, but this NAT rule can not work. Then reboot DUT, this rule can works
properly.
Condition: Step1: In GUI/Advanced Setup/NAT, choose “Full Feature”.
Step2: In “Full Feature”, configure a NAT rule (For example: One-to-One,
or Many-to-One……).
Step3: While complete the setting, this NAT “Full Feature” rule can not
work. Then reboot DUT, this rule can works properly.
Step4: In SMT, it has no this issue.
Feature”, but this NAT rule can not work. Then reboot DUT, this rule can works
properly.
Condition: Step1: In GUI/Advanced Setup/NAT, choose “Full Feature”.
Step2: In “Full Feature”, configure a NAT rule (For example: One-to-One,
or Many-to-One……).
Step3: While complete the setting, this NAT “Full Feature” rule can not
work. Then reboot DUT, this rule can works properly.
Step4: In SMT, it has no this issue.
2.
[Bug Fix] SPRID: 050506301
Symptom: use pppoe encapsulation， get rom-t file from LAN pc change some
configuration and put the rom-t file, then pppoe login password will be change.
Condition: step1: use pppoe encapsulation, get rom-t file from LAN pc change some
configuration(such as system name->1234)
step2: put rom-t file from LAN pc ,after the DUT reboot, pppoe can not dial
up.
step3: change the pppoe login password then can dial up.
configuration and put the rom-t file, then pppoe login password will be change.
Condition: step1: use pppoe encapsulation, get rom-t file from LAN pc change some
configuration(such as system name->1234)
step2: put rom-t file from LAN pc ,after the DUT reboot, pppoe can not dial
up.
step3: change the pppoe login password then can dial up.
3.
[Bug Fix] SPRID: 050310555
Symptom: in eWC can set DUT LAN ip to 0.0.0.0, in SMT menu3.2 when set it, it
warning “0.0.0.0 is not a valid IP address” they are not match.
Condition: N/A
warning “0.0.0.0 is not a valid IP address” they are not match.
Condition: N/A
4.
[Bug Fix] SPRID: 050310549
Symptom: When 2 PCs visit eWC of DUT, the priority have some problem .
Condition: N/A
Condition: N/A
5.
[Bug Fix] SPRID: 041222143
Symptom: in menu 24.11, leave the telnet server port default, upload firmware using
tftp from lan side pc, it always fails; but if telnet server port is changed to 23, the
function works well.
Condition: N/A
tftp from lan side pc, it always fails; but if telnet server port is changed to 23, the
function works well.
Condition: N/A
6.
[Bug Fix] SPRID: 041124036
Symptom: 1.In Menu 24.8 typing ”ip ping 192.168.8.1” (the ip address from which
you can get response”.the default times of ping is three.
2.when the device get response in the first time or the second
time.type”ctrl+c”.then type the Up key and Enter quickly.the system will crash and
reboot.
Condition: N/A
you can get response”.the default times of ping is three.
2.when the device get response in the first time or the second
time.type”ctrl+c”.then type the Up key and Enter quickly.the system will crash and
reboot.
Condition: N/A
7.
[Bug Fix] SPRID: 050506307
Symptom: two LAN pc connect to DUT with anyip have problem.
Codition: step1 : use CI command “ip anyip enable yes” turn on DUT anyip
step2: LAN two pc set any ip out of DUT dhcp ip pool.
Codition: step1 : use CI command “ip anyip enable yes” turn on DUT anyip
step2: LAN two pc set any ip out of DUT dhcp ip pool.
step3 when one LAN pc ping access DUT then another pc can not ping
access unless change the static ip.
access unless change the static ip.
8.
[Bug Fix]