ZyXEL P-660RU-T1 Manual Do Utilizador
Prestige 660RU Series Quick Start Guide
3
Hardware Connections
1. Connect the Prestige to a telephone jack using a telephone wire.
2. Use an Ethernet cable to connect a computer to the LAN 10/100M port for
2. Use an Ethernet cable to connect a computer to the LAN 10/100M port for
initial configuration and/or Internet access.
3. If you have a USB-enabled computer that does not have a network
interface card for attaching to your Ethernet network, connect the computer
to the USB port with a USB cable. Refer to the Installing the USB Driver
section.
to the USB port with a USB cable. Refer to the Installing the USB Driver
section.
4. Connect to a power source using the included power adaptor.
5. After you’ve made the connections, connect the power adaptor to a power
5. After you’ve made the connections, connect the power adaptor to a power
supply and push in the power button to turn on the Prestige. Look at the
front panel LEDs.
front panel LEDs.
Check Front Panel LEDs
When the Prestige is turned on, the PWR/SYS LED and USB LEDs blink while
performing system testing. The PWR/SYS LED then turns steady on if the testing is
performing system testing. The PWR/SYS LED then turns steady on if the testing is