ZyXEL p-660r-t1 v2 Manual Do Utilizador

P-660R-Tx v2 Series User’s Guide

Chapter 11 Universal Plug-and-Play (UPnP)

93

Figure 34   Configuring UPnP

The following table describes the labels in this screen.

This section shows how to install UPnP in Windows Me and Windows XP.  

Follow the steps below to install the UPnP in Windows Me. 

1 Click Start and Control Panel. Double-click Add/Remove Programs.

2 Click on the Windows Setup tab and select Communication in the Components 

selection box. Click Details.  

Table 24   Configuring UPnP

Enable the Universal Plug 

and Play (UPnP) Service 

Select this checkbox to activate UPnP. Be aware that anyone could use 

a UPnP application to open the web configurator's login screen without 

entering the ZyXEL Device's IP address (although you must still enter 

the password to access the web configurator).

Allow users to make 

configuration changes 

through UPnP

Select this check box to allow UPnP-enabled applications to 

automatically configure the ZyXEL Device so that they can 

communicate through the ZyXEL Device, for example by using NAT 

traversal, UPnP applications automatically reserve a NAT forwarding 

port in order to communicate with another UPnP enabled device; this 

eliminates the need to manually configure port forwarding for the UPnP 

enabled application. 

Apply

Click Apply to save the setting to the ZyXEL Device.

Cancel

Click Cancel to return to the previously saved settings.