ZyXEL p-660r-t1 v2 Manual Do Utilizador
P-660R-Tx v2 Series User’s Guide
88
Chapter 10 Remote Management Configuration
10.1.2 Remote Management and NAT
When NAT is enabled:
• Use the ZyXEL Device’s WAN IP address when configuring from the WAN.
• Use the ZyXEL Device’s LAN IP address when configuring from the LAN.
• Use the ZyXEL Device’s LAN IP address when configuring from the LAN.
10.1.3 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyXEL Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling.
The ZyXEL Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling.
10.2 Telnet
You can configure your ZyXEL Device for remote Telnet access as shown next.
Figure 32 Telnet Configuration on a TCP/IP Network
10.3 FTP
You can upload and download ZyXEL Device firmware and configuration files using FTP. To
use this feature, your computer must have an FTP client.
use this feature, your computer must have an FTP client.
10.4 Web
You can use the ZyXEL Device’s embedded web configurator for configuration and file
management. See the online help for details.
management. See the online help for details.
10.5 Configuring Remote Management
Click Remote Management to open the following screen.