ZyXEL p-660r-t1 v2 Manual Do Utilizador

P-660R-T1/T3 v2 Quick Start Guide

2

After you’ve made the connections, push in the power button 
to turn on the P-660R-T1/T3 v2. Look at the LEDs. 

• The POWER LED blinks while performing system testing. It 

then turns steady on if the testing is successful. 

• The DSL LED blinks then turns steady on, and blinks when 

there is traffic. 

• The ETHERNET LED turns on if the ETHERNET port is 

properly connected, and blinks when there is traffic.

V

If none of the LEDs are on, unplug the device 
and recheck your hardware connections.

You can configure the P-660R-T1/T3 v2 for Internet access in 
any one of these ways:

.