ZyXEL NSA-2400 Guia Do Utilizador

Chapter 8 Maintenance Screens

NSA-2400 User’s Guide

Use this screen to upgrade the NSA-2400 firmware. You should first have downloaded the 
latest firmware files from the ZyXEL website.

Click the Maintenance link in the Navigation panel and then click the FW Upgrade link or 
the FW Upgrade tab to access the Maintenance > FW Upgrade screen.

Figure 61   Maintenance > FW Upgrade 

Hardware Reset Button

This displays whether the reset button is enabled or not. Use the reset 
button to reset the NSA-2400 (user name to “admin”, default password to 
“1234”, default IP address to 192.168.1.3 with subnet mask of 
255.255.255.0) or restore the factory default configuration file (all  
configurations, including shares, users, passwords and so on are returned 
to the original configurations).

 

Check that the reset button is enabled in 

the Maintenance > Configuration screen.

Enable/Disable 
Hardware Reset 
Button

When the screen button reads Disable Hardware Reset Button, it 
means the button on the NSA-2400 is already enabled.
Click Disable Hardware Reset Button to stop anyone from resetting the 
physical hardware reset button on the NSA-2400. You may want to do 
that if the NSA-2400 is in a public place.

Note: If you disable the reset button, you will not be able to 

access the device if you forget your password. Make 
sure you write it down and keep it in a safe place.

When the button on the screen reads Enable Hardware Reset Button, it 
means the reset button on the NSA-2400 is disabled. 
When you change the reset button setting, a pop-up screen appears 
asking you to confirm. Click OK to continue or Cancel to quit.

Load Default Button

Click this button to reload the factory default settings: 
•

IP address: 192.168.1.3

•

username: admin

•

password: 1234

Table 51   Maintenance > Configuration