ZyXEL NSA-2400 Guia Do Utilizador
Chapter 5 Network Screens
NSA-2400 User’s Guide
74
5.4 TCP/IP Screen
Use the Network > TCP/IP screen to an NSA dynamic or static IP address, subnet mask,
default gateway and DNS servers.
default gateway and DNS servers.
"
The NSA automatically restarts after you apply changes in the TCP/IP or
Windows/CIFS screens.
Windows/CIFS screens.
Figure 30 NSA Rebooting
Default Gateway
If you select Dynamic IP in the TCP/IP screen the default gateway will be
assigned by the DHCP server. If you select Static IP then you must type a
gateway IP address in this field.
assigned by the DHCP server. If you select Static IP then you must type a
gateway IP address in this field.
Jumbo Frame
This field displays whether jumbo frames are enabled.
Windows/CIFS
Information
Information
Server Name
This is the name of the NSA device.
Mode
This shows the Windows/CIFS mode, either Workgroup or Domain.
Workgroup Name
This field displays your workgroup name.
Domain Protocol
This field displays the windows domain protocol you are using. Select
NT4 Domain or Active Directory Domain in the Windows/CIFS screen.
NT4 Domain or Active Directory Domain in the Windows/CIFS screen.
Domain
This is the domain name you have entered.
FTP Information
Enable FTP
This field displays whether or not the NSA allows FTP connections.
Connection Limit
This is the maximum number of sessions allowed to access the NSA
simultaneously via FTP. A single user may have multiple concurrent
sessions.
simultaneously via FTP. A single user may have multiple concurrent
sessions.
Idle Timeout
This field shows the length of time in seconds that the FTP connection
can be idle before timing out.
can be idle before timing out.
Enable Anonymous
This displays whether users are allowed to log into the NSA using an
‘FTP’ user name or ‘anonmyous’ without giving a password.
‘FTP’ user name or ‘anonmyous’ without giving a password.
Table 23 Network > Overview (continued)
LABEL
DESCRIPTION