ZyXEL 35 Guia Do Utilizador

 

 

All contents copyright (c) 2006 ZyXEL Communications Corporation.   

284

 

You can used a sharp pointed object insert it into the little reset hole beside the power connector. Press 

down the reset button and hold down for approx 10 second, the unit will be reset.   When the reset button 

is pressed the device's all parameter will be reset back to factory default. 

The default IP address is 192.168.1.1, Password 1234, ESSID Wireless. 

 

The new ZyWALL series support auto MDX/MDIX 10/100M Ethernet LAN/WAN port to connect to the 

computer on LAN and 10/100M Ethernet to connect to the external cable or xDSL modem on WAN. 

 

In addition to the direct console port connection, the ZyWALL supports the uploading/download of the 

firmware and configuration file using TFTP (Trivial File Transfer Protocol) over LAN.   

Although TFTP should work over WAN as well, it is not recommended because of the potential data corruption 

problems.   

A workaround is to use an alternate path for your upstream path, such as a dial-up connection to an Internet 

service provider. So, if you can find another way to get your upstream packets to the Internet you will still be 

able to receive downstream packets via ZyWALL.   

Currently, there are various ways that ISPs control their users. That is, the WAN IP is provided only when the 

user is checked as an authorized user. The ISPs currently use three ways: 

1.  Check if the 'MAC address' is valid 
2.  Check if the 'Host Name' is valid, e.g., @home