ZyXEL P-791R v2 Guia Do Utilizador

P-791R v2 Support Notes

3. Firmware/Configurations Uploading and

Downloading using FTP

In addition to upload the firmware and configuration file via the console port
and TFTP client, you can also upload the firmware and configuration files to
the P-791R v2 using FTP.

To use this feature, your workstation must have a FTP client software. See the
example shown below.

• Using FTP client software

Note: The remote file name for the firmware is 'ras' and the configuration
file is 'rom-0'.

Step 1

Use FTP client from your workstation to connect to the P-791R v2 by
entering the IP address of the P-791R v2.

Step2

Press 'Enter' key to ignore the username, because the P-791R v2
does not check the username.

Step 3

Enter the CLI password as the FTP login password, the default is
'admin'.

Step 4 Enter command 'bin' to set the transfer type to binary.

Step 5 Use 'put' command to transfer the file to the P-791R v2.

Example:

Step 1: Connect to the P-791R v2 by entering the P-791R v2's IP and
Administrator password in the FTP software. Set the transfer type to
'Auto-Detect' or 'Binary'.