ZyXEL nbg-4615 Guia Do Utilizador
Chapter 18 DHCP Server
NBG4615 User’s Guide
174
18.2 General
Use this screen to enable the DHCP server. Click Network > DHCP Server. The
following screen displays.
following screen displays.
Figure 99 Network > DHCP Server > General
The following table describes the labels in this screen.
Table 62 Network > DHCP Server > General
LABEL
DESCRIPTION
Enable DHCP
Server
Server
Select the checkbox to enable DHCP for LAN.
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC
2132) allows individual clients (computers) to obtain TCP/IP
configuration at startup from a server. Leave the Enable DHCP
Server check box selected unless your ISP instructs you to do
otherwise. Clear it to disable the NBG4615 acting as a DHCP server.
When configured as a server, the NBG4615 provides TCP/IP
configuration for the clients. If not, DHCP service is disabled and
you must have another DHCP server on your LAN, or else the
computers must be manually configured. When set as a server, fill in
the following four fields.
2132) allows individual clients (computers) to obtain TCP/IP
configuration at startup from a server. Leave the Enable DHCP
Server check box selected unless your ISP instructs you to do
otherwise. Clear it to disable the NBG4615 acting as a DHCP server.
When configured as a server, the NBG4615 provides TCP/IP
configuration for the clients. If not, DHCP service is disabled and
you must have another DHCP server on your LAN, or else the
computers must be manually configured. When set as a server, fill in
the following four fields.
IP Pool Starting
Address
Address
This field specifies the first of the contiguous addresses in the IP
address pool for LAN.
address pool for LAN.
Pool Size
This field specifies the size, or count of the IP address pool for LAN.
Apply
Click Apply to save your changes back to the NBG4615.
Cancel
Click Cancel to begin configuring this screen afresh.