ZyXEL GS-4012F Guia Do Utilizador

GS-4012F/4024 User’s Guide

294

Chapter 43  User and Enable Mode Commands

This command displays the MAC address(es) stored in the switch. The following example 
shows the static MAC address table.   

Syntax: 

ping <ip|host-name> < [in-band|out-of-band|vlan <vlan-id> ] [size 
-> <0-1472>] [-t]>

where

This command sends Ping packets to an Ethernet device. The following example sends Ping 
requests to and displays the replies from an Ethernet device with an IP address of 

192.168.1.100

. 

Syntax:

traceroute <ip|host-name> [in-band|out-of-band|vlan <vlan-id>][ttl 
-> <1-255>] [wait <1-60>] [queries <1-10>]

sysname# show mac address-table static
Port      VLAN ID        MAC Address         Type
CPU       1              00:a0:c5:01:23:46   Static
sysname#

<ip|host-name> 

=

The IP address or host name of an Ethernet device. 

[in-band|out-of-
band|vlan <vlan-
id>]

=

Specifies the network interface or the VLAN ID to which the 
Ethernet device belongs. 

out-of-band

 refers to the management port while 

in-band 

means the other ports on the switch. 

[size <0-1472>]

=

Specifies the packet size to send. 

[-t]

=

Sends Ping packets to the Ethernet device indefinitely. Press 

[CTRL]+ C 

to terminate the Ping process. 

sysname# ping 192.168.1.100
 sent  rcvd  rate    rtt     avg    mdev     max     min  reply from
    1     1  100       0       0       0       0       0  192.168.1.100
    2     2  100       0       0       0       0       0  192.168.1.100
    3     3  100       0       0       0       0       0  192.168.1.100
sysname#