ZyXEL nbg-334sh Manual Do Utilizador

Chapter 13 Static Route Screens

ZyXEL NBG-334SH User’s Guide

Figure 75   IP Static Route

The following table describes the labels in this screen.

To edit a static route, click the edit icon under Modify. The following screen displays. Fill in 
the required information for each static route.

Table 50   IP Static Route

#

This is the index number of an individual static route. The first entry is for the 

default route and not editable.

Name

This is the name that describes or identifies this route. 

Active

This icon is turned on when this static route is active.
Click the Edit icon under Modify and select the Active checkbox in the Static 

Route Setup screen to enable the static route. Clear the checkbox to disable this 

static route without having to delete the entry.

Destination

This parameter specifies the IP network address of the final destination. Routing 

is always based on network number. 

Gateway

This is the IP address of the gateway. The gateway is an immediate neighbor of 

your ZyXEL Device that will forward the packet to the destination. On the LAN, the 

gateway must be a router on the same segment as your ZyXEL Device; over the 

WAN, the gateway must be the IP address of one of the remote nodes.

Modify

Click the Edit icon to open the static route setup screen. Modify a static route or 

create a new static route in the Static Route Setup screen.
Click the Remove icon to delete a static route.