ZyXEL nbg-334sh Manual Do Utilizador

Chapter 17 System

ZyXEL NBG-334SH User’s Guide

The following table describes the labels in this screen.

To change your ZyXEL Device’s time and date, click Maintenance > System > Time 
Setting. The screen appears as shown. Use this screen to configure the ZyXEL Device’s time 
based on your local time zone.

Table 67   System General

System Name

System Name is a unique name to identify the ZyXEL Device in an Ethernet 

network. It is recommended you enter your computer’s “Computer name” in this 

field (see the chapter about wizard setup for how to find your computer’s name). 
This name can be up to 30 alphanumeric characters long. Spaces are not 

allowed, but dashes “-” and underscores "_" are accepted.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the ISP 

may assign a domain name via DHCP. 
The domain name entered by you is given priority over the ISP assigned domain 

name.

Administrator 

Inactivity Timer

Type how many minutes a management session can be left idle before the 

session times out. The default is 5 minutes. After it times out you have to log in 

with your password again. Very long idle timeouts may have security risks. A 

value of "0" means a management session never times out, no matter how long it 

has been left idle (not recommended).

Password Setup

Change your ZyXEL Device’s password (recommended) using the fields as 

shown.

Old Password

Type the default password or the existing password you use to access the 

system in this field.

New Password

Type your new system password (up to 30 characters). Note that as you type a 

password, the screen displays an asterisk (*) for each character you type.

Retype to Confirm

Type the new password again in this field.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to begin configuring this screen afresh.