ZyXEL nbg-334sh Manual Do Utilizador

Chapter 3 Introducing the Web Configurator

ZyXEL NBG-334SH User’s Guide

This screen displays the IP address of each computer that is using the ZyXEL Device via the 
any IP feature. Any IP allows computers to access the Internet through the ZyXEL Device 
without changing their network settings when NAT is enabled. To access this screen, open the 
Status screen (see 

), and click (Details...) next to Any IP Table.

Figure 19   Any IP Table

Select the BW MGMT Monitor (Details...) hyperlink in Status screen. View the bandwidth 
usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over 
the bandwidth budget for each rule. The gray section of the bar represents the percentage of 
unused bandwidth and the blue color represents the percentage of bandwidth in use.

UPnP

General

Use this screen to enable UPnP on the ZyXEL Device. 

Maintenance

System

General

Use this screen to view and change administrative settings such as 

system and domain names, password and inactivity timer.

Time Setting

Use this screen to change your ZyXEL Device’s time and date.

Logs

View Log

Use this screen to view the logs for the categories that you 

selected.

Log Settings

Use this screen to change your ZyXEL Device’s log settings.

Tools

Firmware

Use this screen to upload firmware to your ZyXEL Device.

Configuration Use this screen to backup and restore the configuration or reset 

the factory defaults to your ZyXEL Device. 

Restart

This screen allows you to reboot the ZyXEL Device without turning 

the power off.

Config Mode

General

This screen allows you to display or hide the advanced screens or 

features.

Table 4   Screens Summary