ZyXEL nbg-334sh Manual Do Utilizador

Chapter 4 Connection Wizard

ZyXEL NBG-334SH User’s Guide

2 If the ISP did not give you DNS server information, leave the DNS Server fields set to 

0.0.0.0 in the Wizard screen and/or set to From ISP in the WAN > Internet 
Connection screen for the ISP to dynamically assign the DNS server IP addresses.

The following wizard screen allows you to assign a fixed WAN IP address and DNS server 
addresses. 

Figure 36   Wizard Step 3: WAN IP and DNS Server Addresses

The following table describes the labels in this screen

Table 17   Wizard Step 3: WAN IP and DNS Server Addresses

WAN IP Address Assignment 

My WAN IP Address

Enter your WAN IP address in this field. The WAN IP address should be in 

the same subnet as your DSL/Cable modem or router.

My WAN IP Subnet Mask

Enter the IP subnet mask in this field.

Gateway IP Address 

Enter the gateway IP address in this field. 

System DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice 

versa. The DNS server is extremely important because without it, you must know the IP address of a 

computer before you can access it. The ZyXEL Device uses a system DNS server (in the order you 

specify here) to resolve domain names for DDNS and the time server.

First DNS Server
Second DNS Server 
Third DNS Server 

Enter the DNS server's IP address in the fields provided.
If you do not configure a system DNS server, you must use IP addresses 

when configuring DDNS and the time server.

Back

Click Back to return to the previous screen.

Next

Click Next to continue. 

Exit

Click Exit to close the wizard screen without saving.