ZyXEL nbg-334sh Manual Do Utilizador

 Chapter 5 Wireless LAN

ZyXEL NBG-334SH User’s Guide

"

If you are configuring the ZyXEL Device from a computer connected to the 
wireless LAN and you change the ZyXEL Device’s SSID, channel or security 
settings, you will lose your wireless connection when you press Apply to 
confirm. You must then change the wireless settings of your computer to 
match the ZyXEL Device’s new settings.

Click Network > Wireless LAN to open the General screen.

Figure 42   Wireless General 

The following table describes the general wireless LAN labels in this screen.

See the rest of this chapter for information on the other labels in this screen. 

Table 23   Wireless General

Enable 

Wireless LAN

Click the check box to activate wireless LAN.

Name(SSID)

(Service Set IDentity) The SSID identifies the Service Set with which a wireless 

station is associated. Wireless stations associating to the access point (AP) must 

have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII 

characters) for the wireless LAN. 

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station 

cannot obtain the SSID through scanning using a site survey tool.

Channel 

Selection

Set the operating frequency/channel depending on your particular region. 
Select a channel from the drop-down list box. The options vary depending on 

whether you are using A or B/G frequency band and the country you are in.  
Refer to the Connection Wizard chapter for more information on channels.

Operating 

Channel 

This displays the channel the ZyXEL Device is currently using.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to reload the previous configuration for this screen.