ZyXEL nbg-334sh Manual Do Utilizador

 Chapter 6 WAN

ZyXEL NBG-334SH User’s Guide

To change your ZyXEL Device’s advanced WAN settings, click Network > WAN > 
Advanced. The screen appears as shown.

Figure 54   WAN > Advanced

First DNS Server
Second DNS Server
Third DNS Server 

Select From ISP if your ISP dynamically assigns DNS server information (and 

the ZyXEL Device's WAN IP address). The field to the right displays the (read-

only) DNS server IP address that the ISP assigns. 
Select User-Defined if you have the IP address of a DNS server. Enter the 

DNS server's IP address in the field to the right. If you chose User-Defined, 

but leave the IP address set to 0.0.0.0, User-Defined changes to None after 

you click Apply. If you set a second choice to User-Defined, and enter the 

same IP address, the second User-Defined changes to None after you click 

Apply. 
Select None if you do not want to configure DNS servers. If you do not 

configure a DNS server, you must know the IP address of a computer in order 

to access it.

WAN MAC Address

The MAC address section allows users to configure the WAN port's MAC 

address by either using the ZyXEL Device’s MAC address, copying the MAC 

address from a computer on your LAN or manually entering a MAC address. 

Factory default

Select Factory default to use the factory assigned default MAC Address.

Clone the computer’s 

MAC address

Select Clone the computer's MAC address - IP Address and enter the IP 

address of the computer on the LAN whose MAC you are cloning. Once it is 

successfully configured, the address will be copied to the rom file (ZyNOS 

configuration file). It will not change unless you change the setting or upload a 

different ROM file. 

Set WAN MAC 

Address

Select this option and enter the MAC address you want to use.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to begin configuring this screen afresh.

Table 34   PPTP Encapsulation