ZyXEL p-2802h-i1 Manual Do Utilizador

Chapter 10 Voice

P-2802H(W)(L)-I Series User’s Guide

Use this screen to activate and deactivate immediate dialing. To access this screen, click VoIP 
> Phone > Common.

Figure 80   Phone > Common

Each field is described in the following table.

Listening Volume

Enter the loudness that the ZyXEL Device uses for speech that it receives from 

the peer device. -1 is the quietest, and 1 is the loudest.

Echo Cancellation

Active G.168 

Select this if you want to eliminate the echo caused by the sound of your voice 

reverberating in the telephone receiver while you talk.

Dialing Interval 

Select

Dialing Interval 

Select

Enter the number of seconds the ZyXEL Device should wait after you stop dialing 

numbers before it makes the phone call. The value depends on how quickly you 

dial phone numbers.
If you select Active Immediate Dial in VoIP > Phone > Common, you can press 

the pound key (#) to tell the ZyXEL Device to make the phone call immediately, 

regardless of this setting.

Active VAD

Select this if the ZyXEL Device should stop transmitting when you are not 

speaking. This reduces the bandwidth the ZyXEL Device uses.

Back

Click this to return to the Analog Phone screen without saving your changes.

Apply

Click this to save your changes.

Cancel

Click this to set every field in this screen to its last-saved value.

Table 52   Phone > Analog Phone > Advanced

Table 53   Phone > Common

Immediate Dial

Active Immediate 

Dial

Select this if you want to use the pound key (#) to tell the ZyXEL Device to make 

the phone call immediately, instead of waiting the number of seconds you selected 

in the Dialing Interval Select in VoIP > Phone > Analog Phone.
If you select this, dial the phone number, and then press the pound key. The 

ZyXEL Device makes the call immediately, instead of waiting. You can still wait, if 

you want.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.