ZyXEL p-2802h-i1 Manual Do Utilizador

 Chapter 10 Voice

P-2802H(W)(L)-I Series User’s Guide

You can create two sets of call-forwarding rules. Each one is stored in a call-forwarding table. 
Each field is described in the following table.

Table 58   Phone Book > Incoming Call Policy

Table Number

Select the call-forwarding table you want to see in this screen. If you change this 

field, the screen automatically refreshes.

Forward to 

Number Setup

The ZyXEL Device checks these rules, in the order in which they appear, after it 

checks the rules in the Advanced Setup section.

Unconditional 

Forward to 

Number

Select this if you want the ZyXEL Device to forward all incoming calls to the 

specified phone number, regardless of other rules in the Forward to Number 

section. Specify the phone number in the field on the right.

Busy Forward to 

Number

Select this if you want the ZyXEL Device to forward incoming calls to the specified 

phone number if the phone port is busy. Specify the phone number in the field on 

the right. If you have call waiting, the incoming call is forwarded to the specified 

phone number if you reject or ignore the second incoming call.

No Answer 

Forward to 

Number

Select this if you want the ZyXEL Device to forward incoming calls to the specified 

phone number if the call is unanswered. (See No Answer Waiting Time.) Specify 

the phone number in the field on the right.

No Answer 

Waiting Time

This field is used by the No Answer Forward to Number feature and No Answer 

conditions below.
Enter the number of seconds the ZyXEL Device should wait for you to answer an 

incoming call before it considers the call is unanswered.

Advanced Setup

The ZyXEL Device checks these rules before it checks the rules in the Forward to 

Number section.

#

This field is a sequential value, and it is not associated with a specific rule. The 

sequence is important, however. The ZyXEL Device checks each rule in order, 

and it only follows the first one that applies.

Activate

Select this to enable this rule. Clear this to disable this rule.

Incoming Call 

Number

Enter the phone number to which this rule applies.

Forward to 

Number

Enter the phone number to which you want to forward incoming calls from the 

Incoming Call Number. You may leave this field blank, depending on the 

Condition.

Condition

Select the situations in which you want to forward incoming calls from the 

Incoming Call Number, or select an alternative action.
Unconditional - The ZyXEL Device immediately forwards any calls from the 

Incoming Call Number to the Forward to Number.
Busy - The ZyXEL Device forwards any calls from the Incoming Call Number to 

the Forward to Number when your SIP account already has a call connected.
No Answer - The ZyXEL Device forwards any calls from the Incoming Call 

Number to the Forward to Number when the call is unanswered. (See No 

Answer Waiting Time.)
Block - The ZyXEL Device rejects calls from the Incoming Call Number.
Accept - The ZyXEL Device allows calls from the Incoming Call Number. You 

might create a rule with this condition if you do not want incoming calls from 

someone to be forwarded by rules in the Forward to Number section.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.