ZyXEL p-2802h-i1 Manual Do Utilizador

Chapter 19 Remote Management Configuration

P-2802H(W)(L)-I Series User’s Guide

Use this screen to configure the ZyXEL Device’s HTTP and HTTPS management settings. 
Click Advanced > Remote MGMT to display the WWW screen.

Figure 148   Remote Management: WWW

The following table describes the labels in this screen.

Table 105   Remote Management: WWW

WWW

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

HTTPS

Server Host Key

Select the Server Host Key that the ZyXEL Device will use to identify itself. The 

ZyXEL Device is the SSL server and must always authenticate itself to the SSL 

client (the computer which requests the HTTPS connection with the ZyXEL 

Device).  

Authenticate 

Client Certificates

Select Authenticate Client Certificates (optional) to require the SSL client to 

authenticate itself to the ZyXEL Device by sending the ZyXEL Device a certificate. 

To do that the SSL client must have a CA-signed certificate from a CA that has 

been imported as a trusted CA on the ZyXEL Device (see 

on importing certificates for details).