ZyXEL p-2802h-i1 Manual Do Utilizador

Página de 418
Chapter 22 Logs
P-2802H(W)(L)-I Series User’s Guide
300
 
0
A gateway may discard internet datagrams if it does not have the buffer space 
needed to queue the datagrams for output to the next network on the route to 
the destination network.
5
Redirect
0
Redirect datagrams for the Network
1
Redirect datagrams for the Host
2
Redirect datagrams for the Type of Service and Network
3
Redirect datagrams for the Type of Service and Host
8
Echo
0
Echo message
11
Time Exceeded
0
Time to live exceeded in transit
1
Fragment reassembly time exceeded
12
Parameter Problem
0
Pointer indicates the error
13
Timestamp
0
Timestamp request message
14
Timestamp Reply
0
Timestamp reply message
15
Information Request
0
Information request message
16
Information Reply
0
Information reply message
Table 132   Syslog Logs
LOG MESSAGE
DESCRIPTION
<Facility*8 + Severity>Mon dd 
hr:mm:ss hostname 
src="<srcIP:srcPort>" 
dst="<dstIP:dstPort>" 
msg="<msg>" note="<note>" 
devID="<mac address last three 
numbers>" cat="<category>
"This message is sent by the system ("RAS" displays as 
the system name if you haven’t configured one) when the 
router generates a syslog. The facility is defined in the web 
MAIN MENU->LOGS->Log Settings page. The severity is 
the log’s syslog class. The definition of messages and 
notes are defined in the various log charts throughout this 
appendix. The “devID” is the last three characters of the 
MAC address of the router’s LAN port. The “cat” is the 
same as the category in the router’s logs.
Table 133   SIP Logs
LOG MESSAGE
DESCRIPTION
SIP Registration Success 
by SIP:SIP Phone Number
The listed SIP account was successfully registered with a SIP 
register server.
SIP Registration Fail by 
SIP:SIP Phone Number
An attempt to register the listed SIP account with a SIP register 
server was not successful.
Table 131   ICMP Notes (continued)
TYPE
CODE
DESCRIPTION