ZyXEL p-2802h-i1 Manual Do Utilizador

 Chapter 5 Status Screens

P-2802H(W)(L)-I Series User’s Guide

System Status

System 

Uptime

This field displays how long the ZyXEL Device has been running since it last 

started up. The ZyXEL Device starts up when you plug it in, when you restart it 

(Maintenance > Tools > Restart), or when you reset it (see 

Current Date/

Time

This field displays the current date and time in the ZyXEL Device. You can change 

this in Maintenance > System > Time Setting.

System Mode

This displays whether the ZyXEL Device is functioning as a router or a bridge.
The ZyXEL Device is always in routing mode when the first Ethernet port is the 

WAN port to allow Internet access via an Ethernet connection to a broadband 

modem or router.

WAN Interface This displays whether the ZyXEL Device is using the VDSL port for Internet 

access (VDSL) or using the first Ethernet port as the WAN port (Ethernet).

CPU Usage

This field displays what percentage of the ZyXEL Device’s processing ability is 

currently used. When this percentage is close to 100%, the ZyXEL Device is 

running at full load, and the throughput is not going to improve anymore. If you 

want some applications to have more throughput, you should turn off other 

applications (for example, using QoS; see 

Memory 

Usage

This field displays what percentage of the ZyXEL Device’s memory is currently 

used. Usually, this percentage should not increase much. If memory usage does 

get close to 100%, the ZyXEL Device is probably becoming unstable, and you 

should restart the device. See 

, or turn off the device 

(unplug the power) for a few seconds.

Interface Status

Interface

This column displays each interface the ZyXEL Device has.

Status

This field indicates whether or not the ZyXEL Device is using the interface.
For the DSL interface, this field displays Down if you're using Ethernet 

encapsulation or the DSL port is disabled and Down (line is down), Up (line is up 

or connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop 

(dropping a call) if you're using PPPoE encapsulation.
For the LAN interface, this field displays Up when the ZyXEL Device is using the 

interface and Down when the ZyXEL Device is not using the interface.
For the WLAN interface, it displays Active when WLAN is enabled or Inactive 

when WLAN is disabled.

Rate

For the LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream transmission rate 

or N/A when the DSL port is disabled.
For the WLAN interface, it displays the maximum transmission rate when WLAN is 

enabled or N/A when WLAN is disabled.

Summary

Client List

Click this link to view current DHCP client information. See 

AnyIP Table

Click this link to view a list of IP addresses and MAC addresses of computers, 

which are not in the same subnet as the ZyXEL Device. See 

WLAN Status

Click this link to display the MAC address(es) of the wireless stations that are 

currently associating with the ZyXEL Device. See 

VPN Status

Click this link to view the ZyXEL Device’s current VPN connections. See 

.

Table 15   Status Screen