ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 7 WiFi WAN

105

When the ZyXEL Device is set to WiFi WAN router mode, use the WiFi screen to connect to 
a specified wireless network or any available wireless network within range. The ZyXEL 
Device and the wireless network must use the same wireless and wireless security settings. 

Click Network > WiFi WAN > WiFi to open the WiFi screen.

Relogin Every(min)    

(Telia Login only)

The Telia server logs the ZyXEL Device out if the ZyXEL Device does not log in 

periodically. Type the number of minutes from 1 to 59 (30 default) for the ZyXEL 

Device to wait between logins.

WAN IP Address Assignment 

Get automatically 

from ISP 

Select this option If your ISP did not assign you a fixed IP address. This is the 

default selection. 

Use Fixed IP 

Address

Select this option If the ISP assigned a fixed IP address. 

IP Address

Enter your WAN IP address in this field if you selected Use Fixed IP Address. 

IP Subnet 

Mask

Enter the IP Subnet Mask in this field.

Gateway IP 

Address

Enter a Gateway IP Address (if your ISP gave you one) in this field.

DNS Servers

First DNS Server
Second DNS 

Server
Third DNS Server 

Select From ISP if your ISP dynamically assigns DNS server information (and the 

ZyXEL Device's WAN IP address). The field to the right displays the (read-only) 

DNS server IP address that the ISP assigns. 
Select User-Defined if you have the IP address of a DNS server. Enter the DNS 

server's IP address in the field to the right. If you chose User-Defined, but leave 

the IP address set to 0.0.0.0, User-Defined changes to None after you click 

Apply. If you set a second choice to User-Defined, and enter the same IP 

address, the second User-Defined changes to None after you click Apply. 
Select None if you do not want to configure DNS servers. If you do not configure a 

DNS server, you must know the IP address of a computer in order to access it.

WAN MAC 

Address

The MAC address section allows users to configure the WAN port's MAC address 

by either using the ZyXEL Device’s MAC address, copying the MAC address from 

a computer on your LAN or manually entering a MAC address. 

Factory default

Select Factory default to use the factory assigned default MAC Address.

Clone the 

computer’s MAC 

address - IP 

Address

Select Clone the computer's MAC address - IP Address and enter the IP 

address of the computer on the LAN whose MAC you are cloning. Once it is 

successfully configured, the address will be copied to the rom file (ZyNOS 

configuration file). It will not change unless you change the setting or upload a 

different ROM file. 

Set Wireless WAN 

MAC Address

Select this option and enter the MAC address you want to use.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to begin configuring this screen afresh.

Table 38   WiFi WAN > Internet Connection  (continued)