ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 2 Introducing the Web Configurator

41

The following screen displays when the ZyXEL Device is set to AP mode.

- CPU Usage

This displays what percentage of the ZyXEL Device’s processing ability is currently 

used. When this percentage is close to 100%, the ZyXEL Device is running at full 

load, and the throughput is not going to improve anymore. If you want some 

applications to have more throughput, you should turn off other applications (for 

example, using bandwidth management.

- Memory Usage

This shows what percentage of the heap memory the ZyXEL Device is using. Heap 

memory refers to the memory that is not used by ZyNOS (ZyXEL Network Operating 

System) and is thus available for running processes like NAT and the firewall. 

System Setting

- Firewall

This shows whether the firewall is active or not.

- Bandwidth Management This shows whether the bandwidth management is active or not.

- UPnP

This shows whether UPnP is active or not.

- Configuration Mode

This shows whether the advanced screens of each feature are turned on (Advanced) 

or not (Basic).

- System Operation Mode This shows whether the ZyXEL Device is working as a router, access point or WiFi 

WAN router.

Interface Status

Interface

This displays the ZyXEL Device port types. The port types are: WAN, LAN and 

WLAN.

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up 

or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is 

disabled.

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A when the 

line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using 

Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and 

Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field 

displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled 

and N/A when the WLAN is disabled.

Summary

BW MGNT Monitor

Use this screen to view the ZyXEL Device’s bandwidth usage and allotments.

DHCP Table

Use this screen to view current DHCP client information.

Packet Statistics

Use this screen to view port status and packet specific statistics.

WLAN Station Status

Use this screen to view the wireless stations that are currently associated to the 

ZyXEL Device.

Table 3   Web Configurator Status Screen (Router Mode)  (continued)