ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 4 Wireless LAN

73

The following table describes the general wireless LAN labels in this screen.

Table 27   Wireless General

Enable 

Wireless LAN

Click the check box to activate wireless LAN.

Name(SSID)

(Service Set IDentity) The SSID identifies the Service Set with which a wireless 

station is associated. Wireless stations associating to the access point (AP) must 

have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII 

characters) for the wireless LAN. 

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station 

cannot obtain the SSID through scanning using a site survey tool.

Channel 

Selection

Set the operating frequency/channel depending on your particular region. 
Select a channel from the drop-down list box. The options vary depending on whether 

you are using A or B/G frequency band and the country you are in. This field is not 

available when you select Auto Channel Selection.  
Refer to the Connection Wizard chapter for more information on channels.

Auto Channel 

Selection 

Select the check box to have the ZyXEL Device automatically scan for and select a 

channel which is not used by another device.

Operating 

Channel 

This displays the channel the ZyXEL Device is currently using.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to reload the previous configuration for this screen.

See the rest of this chapter for information on the other labels in this screen. 

Select No Security to allow wireless stations to communicate with the access points without 
any data encryption. 

Note: If you do not enable any wireless security on your ZyXEL Device, your network 

is accessible to any wireless networking device that is within range.