ZyXEL p-334wh Guia Do Utilizador

P-334WH User’s Guide

Chapter 4 Wireless LAN

81

Click Network > Wireless LAN > Advanced. The screen appears as shown.

Figure 38   Wireless LAN Advanced

The following table describes the labels in this screen. 

Table 33   Wireless LAN Advanced

Wireless Advanced Setup

RTS/CTS 

Threshold

Data with its frame size larger than this value will perform the RTS (Request To 

Send)/CTS (Clear To Send) handshake. 
If the RTS/CTS value is greater than the Fragmentation Threshold value, then the 

RTS/CTS handshake will never occur as data frames will be fragmented before they 

reach RTS/CTS size.
Enter a value between 0 and 2432. 

Fragmentation 

Threshold

It is the maximum data fragment size that can be sent. Enter a value between 256 

and 2432. 

Output Power 

Set the output power of the ZyXEL Device in this field. If there is a high density of APs 

within an area, decrease the output power of the ZyXEL Device to reduce 

interference with other APs.
The options are 100%, 80% and 60%.

802.11 Mode

Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate with 

the ZyXEL Device.
Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate with 

the ZyXEL Device.
Select 802.11b/g to allow either IEEE802.11b or IEEE802.11g compliant WLAN 

devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL 

Device might be reduced. 

Apply

Click Apply to save your changes back to the ZyXEL Device.

Reset

Click Reset to reload the previous configuration for this screen.