ZyXEL NBG-419N Guia Do Utilizador

 Chapter 11 Wireless LAN

NBG-419N User’s Guide

Use this screen to enable the Wireless LAN, enter the SSID and select the wireless 
security mode.

Note: If you are configuring the NBG-419N from a computer connected to the wireless 

LAN and you change the NBG-419N’s SSID, channel or security settings, you 
will lose your wireless connection when you press Apply to confirm. You must 
then change the wireless settings of your computer to match the NBG-419N’s 
new settings.

Click Network > Wireless LAN to open the General screen.

Figure 67   Network > Wireless LAN > General 

The following table describes the general wireless LAN labels in this screen.

Table 36   Network > Wireless LAN > General

Wireless Setup
Wireless LAN

This is turned on by default. 

You can turn the wireless LAN on or off using the switch at the rear panel 
of the NBG-419N. The current wireless state is reflected in this field.

Network 
Name(SSID)

(Service Set IDentity) The SSID identifies the Service Set with which a 
wireless station is associated. Wireless stations associating to the NBG-
419N must have the same SSID. Enter a descriptive name (up to 32 
keyboard characters) for the wireless LAN. 

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a 
station cannot obtain the SSID through scanning using a site survey tool.

Channel 
Selection

Set the operating frequency/channel depending on your particular region. 

Select a channel from the drop-down list box. The options vary depending 
on the frequency band and the country you are in.

Refer to the Connection Wizard chapter for more information on channels. 
This option is only available if Auto Channel Selection is disabled.