ZyXEL NBG-419N Guia Do Utilizador

Chapter 11 Wireless LAN

NBG-419N User’s Guide

Click Network > Wireless LAN > WDS tab. The following screen opens with the 
Basic Setting set to Disabled, and Security Mode set to No Security.

Figure 77   Network > Wireless LAN > WDS

The following table describes the labels in this screen.

Table 46   Network > Wireless LAN > WDS

WDS Setup
Basic Settings

Select the operating mode for your NBG-419N.

• AP + Bridge -

 

The NBG-419N functions as a bridge and access point 

simultaneously. 

• Bridge - The NBG-419N acts as a wireless network bridge and 

establishes wireless links with other APs. You need to know the MAC 

address of the peer device, which also must be in bridge mode. The 

NBG-419N can establish up to five wireless links with other APs.

Local MAC 
Address

This is the MAC address of your NBG-419N.

Phy Mode

Select the Phy mode you want the NBG-419N to use. This dictates the 
maximum size of packets during data transmission.

Remote MAC 
Address

This is the MAC address of the peer device that your NBG-419N wants 
to make a bridge connection with.

You can connect to up to 4 peer devices.

Security
EncrypType

Select whether to use WEP,  TKIP or AES encryption for your WDS 
connection in this field.

Otherwise, select No Security.

EncrypKey

The Encryp key is used to encrypt data. Peers must use the same key 
for data transmission.