ZyXEL NBG-419N Guia Do Utilizador

Chapter 12 WAN

NBG-419N User’s Guide

The following table describes the labels in this screen.

Table 49   Network > WAN > Internet Connection: PPTP Encapsulation

ISP Parameters for Internet Access
Connection Type

To configure a PPTP client, you must configure the User Name and 
Password fields for a PPP connection and the PPTP parameters for 
a PPTP connection.

User Name

Type the user name given to you by your ISP. 

Password

Type the password associated with the User Name above.

Retype to Confirm

Type your password again to make sure that you have entered is 
correctly. 

Nailed-up 
Connection

Select Nailed-Up Connection if you do not want the connection to 
time out.

Idle Timeout

This value specifies the time in minutes that elapses before the 
NBG-419N automatically disconnects from the PPTP server.

PPTP Configuration 
Server IP Address

Type the IP address of the PPTP server.

Get automatically 
from ISP 

Select this option If your ISP did not assign you a fixed IP address. 
This is the default selection. 

Use Fixed IP 
Address

Select this option If the ISP assigned a fixed IP address. 

IP Address

Enter your WAN IP address in this field if you selected Use Fixed IP 
Address. 

IP Subnet Mask

Your NBG-419N will automatically calculate the subnet mask based 
on the IP address that you assign. Unless you are implementing 
subnetting, use the subnet mask computed by the NBG-419N.

Gateway IP 

Address

Enter a Gateway IP Address (if your ISP gave you one) in this 
field.

WAN IP Address Assignment 
Get automatically 
from ISP 

Select this to get your WAN IP address from your ISP.

Use Fixed IP 
Address

Select this option If the ISP assigned a fixed IP address. 

My WAN IP 

Address

Enter your WAN IP address in this field if you selected Use Fixed IP 
Address. 

WAN DNS Assignment