ZyXEL NBG-419N Guia Do Utilizador

Chapter 30 Sys OP Mode

NBG-419N User’s Guide

Note: If you select the incorrect System Operation Mode you may not be able to 

connect to the Internet.

Access Point

Select Access Point Mode if your device bridges traffic between clients 
on the same network.

• In Access Point mode all Ethernet ports have the same IP address. 
• All ports on the rear panel of the device are LAN ports, including the 

port labeled WAN. There is no WAN port.

• The DHCP server on your device is disabled. 
• The IP address of the device on the local network is set to 192.168.1.2.

WISP Mode

Select WISP Mode if your device needs a wireless client to connect to an 
existing access point.

• You cannot configure Wireless LAN settings (including WPS) and 

scheduling in the WISP mode.

• The IP address of the device on the local network is the same as the IP 

address given to the NBG-419N while in router mode (default is 

192.168.1.1).

Apply

Click Apply to save your settings.

Reset

Click Reset to return your settings to the default (Router)